3 Phase Open lupu Stepper Drive Series

Tlhaloso e Khutšoanyane:

3R130 digital 3-phase stepper drive e ipapisitse le algorithm ea patented ea mekhahlelo e meraro, e nang le li-micro tse hahelletsoeng kahare.

thekenoloji ea ho hatakela, e nang le molumo o tlase oa lebelo, ripple e nyane ea torque.E ka bapala ka botlalo ts'ebetso ea mekhahlelo e meraro

li-motors tsa stepper.

3R130 e sebelisetsoa ho khanna li-motor tse tharo tse tlase ho 130mm.

• Pulse mode: PUL & DIR

• Boemo ba pontšo: 3.3 ~ 24V e lumellana;ho hanyetsa letoto ha ho hlokahale bakeng sa ts'ebeliso ea PLC.

• Matla a matla: 110 ~ 230V AC;

• Lisebelisoa tse tloaelehileng: mochine oa ho betla, mochine oa ho itšeha, thepa ea khatiso ea skrine, mochine oa CNC, kopano e ikemetseng

• thepa, joalo-joalo.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Khoasolla

Li-tag tsa Sehlahisoa

Kenyelletso ea Sehlahisoa

Khokahano

Likaroloana

Phepelo ea motlakase	110 - 230 VAC
Output Current	Ho fihla ho 7.0 amps (boleng ba tlhoro)
Taolo ea hajoale	PID algorithm ea taolo ea hajoale
Litlhophiso tsa Micro-steping	Litlhophiso tsa phetoho ea DIP, likhetho tse 16
Lebelo la lebelo	Sebelisa enjene e loketseng, ho fihla ho 3000rpm
Khatello ea resonance	Ka tsela e iketsang bala sebaka sa resonance ebe o thibela ho sisinyeha ha IF
Phetoho ea parameter	Bona paramethara ea enjene ka bo eona ha mokhanni a qala, ntlafatsa ts'ebetso ea taolo
Pulse mode	Tataiso & pulse, CW/CCW ho otla ha habeli
Ho hloekisa pelo	2MHz filthara ea ts'ebetso ea mats'oao a dijithale
Boemo bo sa nke lehlakore	Halofo ea hona joale ka halofo ka mor'a hore koloi e eme

Boemo ba Hona Joale

RMS(A)	SW1	SW2	SW3	SW4	Litlhaloso
0.7A	on	on	on	on	Tse ling tsa hona joale li ka etsoa ka mokhoa o ikhethileng.
1.1A	tima	on	on	on
1.6A	on	tima	on	on
2.0A	tima	tima	on	on
2.4A	on	on	tima	on
2.8A	tima	on	tima	on
3.2A	on	tima	tima	on
3.6A	tima	tima	tima	on
4.0A	on	on	on	tima
4.5A	tima	on	on	tima
5.0A	on	tima	on	tima
5.4A	tima	tima	on	tima
5.8A	on	on	tima	tima
6.2A	tima	on	tima	tima
6.6A	on	tima	tima	tima
7.0A	tima	tima	tima	tima

Micro-steping Setting

Mehato/phetohelo	SW5	SW6	SW7	SW8	Litlhaloso
400	on	on	on	on	Li-pulse tse ling ka phetohelo li ka etsoa ka mokhoa o ikhethileng.
500	tima	on	on	on
600	on	tima	on	on
800	tima	tima	on	on
1000	on	on	tima	on
1200	tima	on	tima	on
2000	on	tima	tima	on
3000	tima	tima	tima	on
4000	on	on	on	tima
5000	tima	on	on	tima
6000	on	tima	on	tima
10000	tima	tima	on	tima
12000	on	on	tima	tima
20000	tima	on	tima	tima
30000	on	tima	tima	tima
60000	tima	tima	tima	tima

Tlhaloso ea Sehlahisoa

Re hlahisa lelapa la rona le lecha la mehato e meraro e bulehileng ea li-loop stepper tse etselitsoeng ho fetola litsamaiso tsa hau tsa taolo ea motor stepper.Letoto lena la li-drive le fana ka likarolo tse tsoetseng pele le ts'ebetso e ke keng ea bapisoa e netefalitsoeng ho feta tebello ea hau.

E 'ngoe ea likarolo tsa bohlokoa tsa mefuta e meraro ea li-loop stepper drives ke lebelo la tsona le ikhethang le ho nepahala.Ka theknoloji ea micro-steping, koloi e etsa hore ho be bonolo ho laola ho sisinyeha, ho netefatsa boemo bo nepahetseng le ts'ebetso e se nang moeli.Ha ho sa tla sisinyeha kapa mehato e fetotsoeng - mefuta ea bakhanni ba rona e tla u fa ts'ebetso e ts'epahalang, e sebetsang nako le nako.

Ntho e 'ngoe e hlokomelehang ea letoto lena la mokhanni ke ho lumellana ha eona le mefuta e mengata ea li-motor stepper.Hore na o sebelisa enjene e nyalisitsoeng ea mekhahlelo e meraro kapa enjene ea bipolar stepper, mefuta ea rona ea likoloi e ka fihlela litlhoko tsa hau.Ts'ebetso ena e fapaneng e etsa hore e be e loketseng bakeng sa lits'ebetso tse fapaneng tsa indasteri, ho kenyeletsoa lisebelisoa tsa mochini oa CNC, liroboto le litsamaiso tsa boiketsetso.

Ho phaella moo, sebaka sa rona sa mokhanni se fana ka ts'ebetso e babatsehang ea mocheso.Theknoloji ea ho pholisa e tsoetseng pele e tiisa hore koloi e sebetsa ka mocheso o nepahetseng esita le tlas'a moroalo o boima, ho thibela ho chesa le ho lelefatsa bophelo ba eona ba tšebeletso.Sena se bolela hore o ka itšetleha ka mefuta ea rona ea li-drive bakeng sa ts'ebetso ea nako e telele, e sa sitisoeng.

Ho feta moo, lelapa la mokhanni oa mehato e meraro le bulehileng-loop le fana ka likhetho tse bonolo tsa tlhophiso le taolo.Ka sebopeho se bonolo sa mosebelisi le software e hlakileng, o ka fetola habonolo liparamente tse fapaneng ho fihlela litlhoko tsa hau tse ikhethileng.Hore na o lokisa lebelo, lebelo le feto-fetohang kapa tokiso e ntle ea hajoale, mefuta ea rona ea li-drive e u fa maemo le taolo eo u e hlokang.

Tlhahisoleseding ya Sehlahiswa

Qetellong, mefuta ea rona ea likoloi e etselitsoe ho mamella maemo a boima haholo a indasteri.Ka moaho o thata le ts'ireletso e felletseng khahlano le ho fetella, li-circuits tse fetelletseng le tse khutšoane, o ka tšepa hore mefuta ea rona ea likoloi e tla tsoela pele ho sebetsa maemong a thata.Moralo oa eona o kopaneng o boetse o lumella ho hokahana habonolo ho sistimi ea hau e teng.

Eba le taolo ea enjene ea mohato o latelang le lelapa la rona la li-open-loop stepper drives tsa mekhahlelo e meraro.Ka ts'ebetso ea eona e phahameng le ts'ebetso e tšepahalang, ke khetho e phethahetseng bakeng sa ts'ebeliso efe kapa efe ea indasteri.Ntlafatsa sistimi ea hau ea taolo kajeno 'me u bone phapang eo mefuta ea rona ea likoloi e e etsang.

E fetileng: 3 Phase Open lupu Stepper Drive Series

E 'ngoe: 5 Phase Open lupu Stepper Drive Series

Buka ea mosebelisi ea Rtelligent 3R130

TS'ELISITSOE

Ngola molaetsa wa hao mona mme o re romele wona