3 Phase Open lupu Stepper Drive Series

Tlhaloso e Khutšoanyane:

3R60 dijithale 3-phase stepper drive e ipapisitse le patented ea mekhahlelo e meraro ea demodulation algorithm, e nang le micro e hahelletsoeng kahare.

thekenoloji ea ho hatakela, e nang le molumo o tlase oa lebelo, ripple e nyane ea torque. E ka bapala ka botlalo ts'ebetso ea mekhahlelo e meraro

stepper motor.

3R60 e sebelisoa ho khanna li-motors tsa mehato tse tharo tse ka tlase ho 60mm.

• Pulse mode: PUL & DIR

• Boemo ba pontšo: 3.3 ~ 24V e lumellana; Letoto la khanyetso ha le hlokehe bakeng sa ts'ebeliso ea PLC.

• Matla a matla: 18-50V DC; 36 kapa 48V e khothalelitsoe.

• Lisebelisoa tse tloaelehileng: mochini o fanang ka thepa, mochini oa solder, mochine oa ho betla, mochine oa ho itšeha oa laser, mochine oa khatiso oa 3D, joalo-joalo.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Khoasolla

Li-tag tsa Sehlahisoa

Kenyelletso ea Sehlahisoa

Khokahano

Likaroloana

Phepelo ea motlakase	24 - 50VDC
Sephetho sa hajoale	DIP switch setting, 8 dikgetho, Ho fihla ho 5.6 amps (boleng ba tlhoro)
Taolo ea hajoale	PID algorithm ea taolo ea hajoale
Litlhophiso tsa Micro-steping	Litlhophiso tsa phetoho ea DIP, likhetho tse 16
Lebelo la lebelo	Sebelisa enjene e loketseng, ho fihla ho 3000rpm
Khatello ea resonance	Ka tsela e iketsang bala sebaka sa resonance ebe o thibela ho sisinyeha ha IF
Phetoho ea parameter	Bona paramethara ea enjene ka bo eona ha mokhanni a qala, ntlafatsa ts'ebetso ea taolo
Pulse mode	Tataiso ea ts'ehetso le sekhahla, CW / CCW ho otla habeli
Ho hloekisa pelo	2MHz sefahla sa lets'oao la dijithale
Nako e sa sebetseng	Hona joale e ikemela ka halofo ka mor'a hore motlakase o khaotse ho sebetsa

Boemo ba Hona Joale

Peak Current	Karolelano ea Hona Joale	SW1	SW2	SW3	Litlhaloso
1.4A	1.0A	on	on	on	Tse ling tsa hona joale li ka etsoa ka mokhoa o ikhethileng.
2.1A	1.5A	tima	on	on
2.7A	1.9A	on	tima	on
3.2A	2.3A	tima	tima	on
3.8A	2.7A	on	on	tima
4.3A	3.1A	tima	on	tima
4.9A	3.5A	on	tima	tima
5.6A	4.0A	tima	tima	tima

Micro-steping Setting

Pulse/rev	SW5	SW6	SW7	SW8	Litlhaloso
200	on	on	on	on	Likarolo tse ling li ka etsoa ka mokhoa o ikhethileng
400	tima	on	on	on
800	on	tima	on	on
1600	tima	tima	on	on
3200	on	on	tima	on
6400	tima	on	tima	on
12800	on	tima	tima	on
25600	tima	tima	tima	on
1000	on	on	on	tima
2000	tima	on	on	tima
4000	on	tima	on	tima
5000	tima	tima	on	tima
8000	on	on	tima	tima
10000	tima	on	tima	tima
20000	on	tima	tima	E tima
25000	tima	tima	tima	tima

Tlhaloso ea Sehlahisoa

Re hlahisa lelapa la rona la phetoho ea mekhahlelo e meraro ea li-loop stepper drives tse etselitsoeng ho fana ka ts'ebetso e phahameng le taolo e nepahetseng bakeng sa litlhoko tsohle tsa hau tsa taolo ea motsamao. Ka likarolo tsa eona tse tsoetseng pele le theknoloji ea morao-rao, mofuta ona o tiisitsoe ho isa lits'ebetso tsa hau holimo.

E 'ngoe ea likarolo tse hlahelletseng tsa mefuta e meraro ea li-loop stepper drives ke ho nepahala le ts'ebetso ea tsona e ke keng ea bapisoa. Qeto e phahameng ea koloi ea mehato e fihlang ho 50,000 ka phetohelo e 'ngoe e netefatsa taolo e bonolo, e nepahetseng ea motsamao le lits'ebetsong tse boima haholo. Hore na o sebetsa ho liroboto, mechini ea CNC, kapa sistimi efe kapa efe ea taolo ea motsamao, bakhanni ba rona ba fana ka liphetho tse holimo nako le nako.

Ntle le ho nepahala ho ikhethang, lelapa la rona la bakhanni ba mehato e meraro ba bulehileng-loop ba fana ka mekhoa e fapaneng ea ts'ebetso, e u lumellang hore u iketsetse mokhanni ho fihlela litlhoko tsa hau tse ikhethileng. Hore na o hloka ts'ebetso ea mehato e felletseng, ea halofo kapa e nyane, li-drive tsa rona li ka amohela litlhoko tsa hau habonolo. Ho feto-fetoha hona ho etsa hore e be khetho e phethahetseng bakeng sa lits'ebetso tse fapaneng, ho tloha mererong e nyane ea ho itlosa bolutu ho isa litsing tse rarahaneng tsa indasteri.

Ho feta moo, malapa a rona a mekhahlelo e meraro ea li-loop stepper a entsoe ka ho tšoarella le ho ts'epahala. E na le moralo o thata le likarolo tsa boleng bo holimo ho netefatsa ts'ebetso e tšoarellang le maemong a thata. Koloi e boetse e na le mekhoa ea ts'ireletso e tsoetseng pele joalo ka ts'ireletso ea overvoltage, overcurrent, le overheating ho sireletsa koloi le lisebelisoa tsa hau tsa bohlokoa.

Tlhahisoleseding ya Sehlahiswa

Ho ntlafatsa boiphihlelo ba mosebelisi le ho nolofatsa ts'ebetso, mefuta ea rona ea mekhahlelo e meraro ea li-loop stepper driver e entsoe ka boiketlo ba tšebeliso kelellong. E na le sebopeho se bonolo sa mosebelisi se lumellang tlhophiso e hlakileng le tokiso ea paramethara. Ntle le moo, e ts'ehetsa likhokahano tse fapaneng tsa puisano, ho kenyeletsoa RS485 le CAN, bakeng sa ho kopanya ka mokhoa o se nang moeli le litsamaiso tsa hau tse teng.

Ka kakaretso, mefuta ea rona ea mekhahlelo e meraro ea li-loop stepper drives ke tharollo ea mantlha bakeng sa taolo e nepahetseng le e sebetsang ea motsamao. Ka ho nepahala ha eona ho ikhethang, mekhoa e fapaneng ea ts'ebetso le moralo o thata, letoto lena le ikemiselitse ho fihlela litlhoko tse batloang haholo tsa kopo ea hau. Eba le phapang ea taolo ea motsamao le lelapa la rona la mekhahlelo e meraro ea li-open-loop stepper drives.

E fetileng: Advanced Pulse Control Digital Stepper Driver R130

E 'ngoe: 3 Phase Open lupu Stepper C Series